Need help?Do you have a question about the Zoomo Zero and is the answer not in the manual?
Adjusting the vertical position of the saddle for optimal riding comfort.
Adjusting the fore/aft position of the saddle for proper leg extension.
Adjusting saddle tilt using a single-bolt seat post clamp.
Adjusting saddle tilt using a dual-bolt seat post clamp.
Adjusting brake lever angle and reach for ergonomic control.
Checking for play and proper adjustment of the steering mechanism.
Instructions for correctly installing bicycle pedals onto the crank arms.
Tightening and securing the front motor axle and nuts.
Setting chain tension and tightening rear axle nuts.
Recommended tyre pressure for optimal performance and safety.
Adjusting chain tension using rear dropouts for optimal performance.
Proper methods for cleaning and lubricating the bike's chain.
Step-by-step guide for replacing worn brake pads.
Procedure for powering the bike system on.
Turning on the bike's display panel.
Using the RFID key to activate the bike system.
Using the bike's USB port to charge external devices.
Selecting and understanding the five pedal assist levels.
Steps to remove the rear derailleur for maintenance.
Adjusting the gear shift barrel for smooth gear changes.
Shutting down the bike with the anti-theft motor lock active.
Shutting down the bike without engaging the anti-theft motor lock.
Instructions for safely removing the battery from the bike.
Procedure for charging the bike's battery.
Ensuring adequate clearance between mudguards and tires.
Guidelines for using the luggage rack and maximum weight limits.
Information on attaching and using approved trailers with the bike.
Essential checks to perform before and after every ride.
Monthly maintenance tasks for bike components.
Semi-annual maintenance checks for frame and components.
Long-term component replacement recommendations.
List of error codes for the bike's controller and their meanings.
List of error codes for the bike's battery and their meanings.
To Next Page
General