EasyManuals Logo

ZORN INSTRUMENTS ZFG 3.0 Instruction Manual

ZORN INSTRUMENTS ZFG 3.0
23 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
22
6.4 Calibration
After the calibration period has been exceeded, a corresponding message appears when the device is
switched on.
In accordance with test specification TP BF-StB Part B 8.3, the Light Weight Deflectome-
ter must be calibrated annually (outside Germany, different regulations may apply). Please
contact your local ZORN partner for this.
6.3 Protection against Deep Discharge (ZFG 3000)
The measuring device is equipped with a deep discharge protection for the battery pack, i.e. in case of
deep discharge the battery is switched off. The settlement measuring device can then no longer be
switched on. Connecting the charger will recharge the device and it will be ready for use again after
approx. four hours.
6.5 Calibration Sites
ZORN INSTRUMENTS GmbH & Co. KG
Benzstr. 1 | 39576 Stendal | Germany
Phone: +49 3931 / 25 27 3-0
Fax: +49 3931 / 25 27 3-10
eMail: info@zorn-instruments.com
Web: www.zorn-instruments.com
Further calibration bodies can be found on the website of the Federal Highway Research Institute
(BASt): www.bast.de.

Other manuals for ZORN INSTRUMENTS ZFG 3.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZORN INSTRUMENTS ZFG 3.0 and is the answer not in the manual?

ZORN INSTRUMENTS ZFG 3.0 Specifications

General IconGeneral
BrandZORN INSTRUMENTS
ModelZFG 3.0
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals