To Next PageTo Next Page
Need help?Do you have a question about the ZORN INSTRUMENTS ZFG 3.0 and is the answer not in the manual?
General| Brand | ZORN INSTRUMENTS |
|---|---|
| Model | ZFG 3.0 |
| Category | Measuring Instruments |
| Language | English |
Instructions for performing measurements when no SD-card is inserted into the device.
User advice on the correct procedure for engaging the drop weight in the release device.
Steps for preparing the test area and connecting the load plate to the ZFG 3.0.
Specific instructions for performing the required three pre-load pulses before measurement.
Instructions on how to switch on the ZFG 3.0 and the initial display screen.
Guide on starting a measurement, executing pulses, and viewing deflection results.
Guidance on actions to take after completing a measurement, such as switching off or continuing.
Menu option to initiate the measurement process as described in chapter 3.3.
Accessing and reviewing data sets previously saved on the SD-card.
Procedure for irreversibly deleting the last recorded measurement from the device.
How to delete all saved data sets from the "ZFG" folder on the SD-card.
Customizing ZFG 3.0 settings like language, contrast, units, and text input.
Choosing the display language from a list of available options.
Modifying the pixel brightness of the device's display for better readability.
Changing the current measurement type (e.g., 300mm/10kg, CBR) for the device.
Setting the display unit for the dynamic deflection modulus (Evd) between MN/m² or MPa.
Adding custom text remarks to measurements before saving.
Enabling or disabling the preloading pulse function for measurements.
Details on the GPS module's function for position fixing and signal reception.
Selecting the display format for GPS coordinates (longitude/latitude or UTM).
Adjusting the date and time displayed on the ZFG 3.0 device.
Viewing device details such as firmware version, calibration data, and used language.
Procedures to check the proper functioning of the sensor and electronics.
Information on how to update the device's firmware with manufacturer assistance.
Instructions for cleaning the loading device and guide rod, avoiding greasing.
Steps for changing the batteries when the device indicates low power.
Identification and description of the main mechanical parts of the LWD.
Technical parameters like mass, height, and drop force for the loading device.
Dimensions and weight details of the load plate used in the test.
Specifications for the settlement gauge, including deflection range and operating temperature.
Information on battery requirements and automatic device switch-off functions.
Details on additional equipment that can be purchased separately for the ZFG 3.0.
Description of the carry bag used for transportation and measurement.
Information about the suitcase for enhanced protection against environmental influences.
Information regarding the printer accessory for the ZFG 3.0.
Step-by-step guide on how to connect and operate the printer for print jobs.
Instructions for charging the printer's battery using the provided AC-adapter.
How to run a self-test on the printer independently of the ZFG 3.0.
Troubleshooting steps when the ZFG 3.0 does not detect the connected printer.
Instructions on how to replace the thermal paper roll in the printer.
Description of the transport box used for storing and transporting the measurement device.
Information about the transport trolley for moving the ZFG 3.0 equipment.
Information on accessing the software manual and performing data import/export.
Contact details and locations for authorized calibration services.
Specific deflection modulus values required for different construction classes and soil types.
