To Next PageTo Next Page
Need help?Do you have a question about the ZORN INSTRUMENTS ZFG 3.1 and is the answer not in the manual?
General| Brand | ZORN INSTRUMENTS |
|---|---|
| Model | ZFG 3.1 |
| Category | Measuring Instruments |
| Language | English |
General safety warnings and precautions for operating the device.
Specific safety guidelines for the ZFG Light Weight Deflectometer.
Details of the technical components included with the LWD.
Visual breakdown and explanation of the LWD components and their functions.
Information on optional and included accessories for the LWD.
Explanation of how measurement data is saved and managed on the device.
Steps required before performing a measurement, including data saving and plate placement.
Step-by-step guide on how to conduct a measurement with the device.
How to view measurement results, settlement curves, and their parameters.
Instructions for printing logged measurement data from the device.
Actions to take after completing a measurement, including power down and cleaning.
How to initiate and perform measurements using the electronic device.
Procedure to access and view measurement data stored on the SD card.
Steps to delete individual measurements or all data from the device.
How to adjust various settings like language, contrast, units, and GPS.
How to set the internal clock and date of the electronic device.
Accessing device details such as version, calibration factor, and language.
Procedures for checking and calibrating the sensor's functionality.
Viewing stored directories and copying internal data to the SD card.
Instructions for changing batteries and caring for rechargeable battery packs.
Measures to prevent deep discharge of the battery pack in the ZFG 3000.
Information on periodic calibration requirements and authorized calibration sites.
