zortrax M300 Packing

Table Of Content
Unloading the Material 3
Unplugging the Power Cable 4
Unplugging the Extruder Cable 5
Disassembling the Side Covers 6
Removing the Platform 7
Lifting up the Heatbed Mount 8
Placing the Foams with Accessories 9
Setting the Extruder in the Right Position 10
Wrapping the Printer 11
Placing the Bottom Cushioning 12
Putting the Printer into the Box 13
Placing the Top Cushioning 14
Packing the Printer 15
Taping the Box 16

zortrax M300 Specifications

General

Build Volume	300 x 300 x 300 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD Card
Operating System	Windows, macOS
Software	Z-SUITE
Printing Speed	up to 100 mm/s
Heated Bed	Yes
Nozzle Temperature	up to 290°C
Supported File Formats	.stl, .obj, .dxf, .3mf
Supported Materials	Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG
Power Supply	100-240 V, 50/60 Hz