Zotac ZBOX CI331 NANO User Manual

ZOTAC ZBOX nano
17
Installing drivers and software
Installing an operating system
Depending on the ZOTAC ZBOX nano model, the system may not ship with an operating
system pre-installed. The user must install the operating system before the ZOTAC ZBOX nano
can be used. The following operating systems are supported:
• Windows 10 64-bit
Follow the instructions below to install an operating system:
1. Attach an external DVD drive (not included) to an available USB port.
2. Insert the operating system installation disk (not included) into the DVD drive.
3. Wait for the ZOTAC ZBOX nano to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX nano hardware and
features.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX nano, the system drivers must be
installed. The following types of operating systems are supported by the USB ash drive:
• Windows 10 64-bit
Follow the instructions below to install the
system drivers:
1. Insert the driver USB ash drive.
If autorun is enabled, the driver installation
main menu will show up automatically.
If autorun is disabled, you may click the
le Launch.EXE to bring up the driver
installation main menu.
2. The following drivers are available on the
USB ash drive:
• Intel Chipset Driver
• Intel Graphics Driver
• Realtek Ethernet PCI-E Driver

Zotac ZBOX CI331 NANO Specifications

General

Brand	Zotac
Model	ZBOX CI331 NANO
Category	Desktop
Language	English