ZOTAC ZBOX nano
13
Setting up your ZOTAC ZBOX nano
Please connect your peripherals before using your ZOTAC ZBOX nano
1. Connecting the WiFi antenna
Connect the WiFi antenna to the WiFi antenna connector.
2. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
end to a network hub, switch or router.
3. Connecting to USB 3.1 devices
Connect USB 3.1 devices such as external hard disk drives, SSDs and ash drives to the USB
3.1 port on the system rear panel.
1
3 4 5 6
7
2
8
1
2
3
4
5 6
7
8
To Next Page
Loading...
Need help?
General
