24
Call Waiting
If you subscribe the call waiting service with your local
telephone service provider, you will hear a beep tone
if someone calls while you are already on a call. Press
FLASH on the handset to put your current call on hold and
take the new call. You can press FLASH any time to switch
back and forth between calls.
• Press the Flash key lightly to switch back to the rst
call.
• Press the Flash key again to switch between two calls.
Three-Way Calling
While on an existing call, rst press FLASH key then
dial the second phone number, when the second party
answers, press the Flash key again to complete the three-
way connection. If the second party does not answer, press
the Flash key to end the connection and return to the rst
party.
NOTE:
If your phone does not have a Flash key, use the off-hook
mechanism supported by your phone instead.