Zte 4G LTE Router with Voice - For Bridge Mode

28
2. Set the detailed parameters for the operation mode.
• For Bridge mode
You can use Wi-Fi to connect to your router, and you
need to connect the WAN to the LAN port via Ethernet
cable and set your PC or other Wi-Fi clients to obtain
the IP address automatically.
Your clients can obtain the IP address from the WAN
DHCP host and connect to the Internet directly.
NOTE:
If you want to change the operation mode to the other
two modes, you need manually set your PC client a xed
IP address like 192.168.1.X, then log in the Web Portal
Conguration Page via http://192.168.1.1 to change it.