Zte 4G LTE Router with Voice - Page 38

37
for your wireless local area network (WLAN).
u
Broadcast Network Name(SSID): Disable or
Enable (Default) this function. If Enable is selected,
the router broadcasts the SSID, and other devices
can detect and connect to it. If Disable is selected,
the other devices cannot detect the router. You can
only connect to the router by manual setting.
u
AP Isolation: When Enable is selected, each
of your wireless clients will not be able to
communicate with each other. When Disable is
selected, each of your wireless clients will be able
to communicate with each other.
u
Security Mode: The security modes are described
below:
1. OPEN: You can authenticate successfully with a
SSID, whether it is valid or empty.
2. WPA-PSK/WPA2-PSK: Apply both the WPA-PSK
and WPA2-PSK scheme.
3. WPA2(AES)-PSK: This is the more secure
version of WPA with implementation of the 802.11i
standard.