Zte A1P - Page 46

46
 Touch to enter the left letter on the key; double-tap or flick
right to enter the right letter/symbol on the key. You can also
touch and hold a key and slide left or right to choose more
letters and symbols.
 If word prediction is enabled ( ), just touch the keys and
choose the right word.
To enable and use TouchPal Curve:
1. In the TouchPal X keyboard screen, touch / >
Settings and check Curve - Word gesture.
2. If prompted, touch OK to switch to the T26 layout.
3. Move your finger from letter to letter on the keyboard to trace
a word without lifting the finger until you reach the end of the
word.
NOTE:
TouchPal Curve is only available in the T26 layout.