What to do if my Zte Axon 7 PIN code is blocked?
If your Zte Cell Phone PIN code is blocked, it's likely because you entered the incorrect PIN code three times in a row. Contact your service provider. If they provide the nano-SIM card’s PUK code, use that code to unlock the nano-SIM card.
Why does my Zte Cell Phone have poor reception?
Poor reception on your Zte Cell Phone can occur because the network signal is weak at your location, such as in a basement or near a tall building. Wireless transmissions might not effectively reach these areas. Try moving to a location where the network signal can be properly received. Alternatively, the network might be busy during peak times, leading to too much traffic. Avoid using the phone at these times, or wait a short while before trying again. Finally, you might be too far from your service provider's base station. In this case, you can request a service area map from them.
What to do if my Zte Axon 7 is unable to connect to the network?
If your Zte Cell Phone can't connect to the network, the nano-SIM card might be invalid, so you should contact your service provider. Another reason could be that you are outside the network's service area; check with your provider about service areas. A poor signal can also prevent connection; try moving to an open space or closer to a window if you're indoors.
Why my Zte Axon 7 Cell Phone cannot charge the battery?
If your Zte Cell Phone battery isn't charging, the battery or charger could be damaged; in this case, contact the dealer. Extreme temperatures (below 0 °C/32° F or above 45 °C/113° F) can also prevent charging; adjust the charging environment to avoid these extremes. A poor connection between the battery and charger can also be the issue; check all connectors to ensure they are secure. Also, if you are in an area with a weak signal, temporarily power off the phone.
What causes a nano-SIM card error on a Zte Axon 7?
A nano-SIM card error on your Zte Cell Phone can occur if the card malfunctions or is damaged; take it to your service provider for testing. It could also be inserted improperly; ensure it is correctly inserted. Debris on the nano-SIM card contacts can also cause this error; use a soft, dry cloth to clean the contacts.
Why can't I select certain features on my Zte Axon 7?
If you're unable to select certain features on your Zte Cell Phone, your service provider might not support these features, or you haven't applied for services that provide these features. Contact your service provider to resolve this.
General| Resolution | 1440 x 2560 pixels |
|---|---|
| Processor | Qualcomm MSM8996 Snapdragon 820 |
| RAM | 4 GB |
| Storage | 64 GB |
| Main Camera | 20 MP |
| Front Camera | 8 MP |
| Battery | 3250 mAh |
| Operating System | Android 6.0.1 (Marshmallow), upgradable to 7.1.1 (Nougat) |
| Dimensions | 151.7 x 75 x 7.9 mm |
| Weight | 175 g |
| SIM | Dual SIM (Nano-SIM, dual stand-by) |
| Colors | Ion Gold, Quartz Gray |
| Display | 5.5 inches, AMOLED |
Identify the phone's hardware components and basic layout.
Instructions for inserting nano-SIM and microSDHC cards.
Steps for safely charging the phone's battery.
Guide to turning the phone on/off and initial configuration.
Instructions for placing, answering, and ending calls.
Taking photos, recording videos, and using camera modes.
Browsing, downloading, and installing apps from the Play Store.
Setting screen locks, fingerprints, and managing accounts.
Diagnosing and resolving issues like poor reception or battery problems.
Important safety guidelines for phone usage and handling.
Information on SAR compliance and FCC regulations.
To Next Page
