4
Setting Up Your Phone
The nano-SIM card can be installed or removed while the
phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut
from a SIM card. You can get a standard nano-SIM card
from your service provider.
1. Insert the tip of the tray eject tool into the hole on the
card tray.
NOTE:
Please use the tray eject tool included in the box.
Otherwise the card tray may not be ejected.
CAUTION:
Never replace the included tray eject tool with sharp
objects. Ensure that the tray eject tool is
perpendicular to the hole. Otherwise, the phone may
be damaged.
2. Pull out the card tray and place the nano-SIM card
and the microSDXC card (optional) on the tray, as
shown. Carefully slide the tray back into place.
To Next Page
Loading...
Need help?
General
