Zte Axon 40 Lite User Manual

7
2. Connect the charger to a standard AC power
outlet.
3. Disconnect the charger when the battery is
fully charged.
NOTE:
If the battery is extremely low, you may be unable
to power on the phone even when it is being
charged. In this case, try again after charging the
phone for at least 20 minutes. Contact the
customer service if you still cannot power on the
phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering
on.
 Press and hold the Power key to turn on your
phone.
 To power off, press and hold the Power key to
open the options menu, and touch > .
NOTE:
If the screen freezes or takes too long to respond,
try pressing and holding the Power key for over 10
seconds to restart the phone.

Zte Axon 40 Lite Specifications

General

Display Size	6.6 inches
Display Type	IPS LCD
Resolution	1080 x 2408 pixels
Processor	Unisoc T616
RAM	4 GB
Storage	128 GB
Main Camera	50 MP + 2 MP + 2 MP
Front Camera	8 MP
Battery Capacity	4500 mAh
Operating System	Android 12
SIM	Dual SIM (Nano-SIM, dual stand-by)