Zte Blade A34 - Powering On;Off Your Phone; Waking up Your Phone

5
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged.
In this case, try again after charging the phone for
at least 20 minutes. Contact the customer service if
you still cannot power on the phone after prolonged
charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering
on.
y
Press and hold the
Power
key to turn on your
phone.
y
To power o󰀨, press and hold the
Power
key until
the power o󰀨/restart menu appears, and then
touch
>
.
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the
Power
key for 10 seconds
to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when
it is not in use for some time. The display is turned
o󰀨 to save power and the keys are locked to prevent
accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
1. Press the
Power
key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verication, an unlock pattern,
a PIN or a password for your phone, you’ll need to
use your face, draw the pattern, or enter the PIN/
password to unlock your screen.