Zte Blade A5 2020-T - Connecting to Mobile Network

23
Connecting to Mobile Network
Set Access Point Names
To connect to the Internet, you can use the default Access
Point Names (APN). And if you want to add a new APN,
please contact the service provider to get the necessary
information.
1. Swipe up from the home screen and touch Settings >
Network & Internet > Mobile network > Advanced.
2. Touch Access point names > .
3. Touch each item to enter the information you get from
your service provider.
4. Touch > Save to complete.
NOTE:
To set the APN to default settings, on the APNs screen
touch > Reset to default.
Turn on/off Mobile Data Switches
1. Swipe up from the home screen and touch Settings >
Network & Internet > Mobile network
2. Touch the switch to turn data on or off.
3. Touch the switch to turn Roaming on or off