Zte Blade L130 User Manual

67
Radio Frequency (RF) Energy
General Statement on RF Energy
Your phone contains a transmitter and a receiver. When it is
ON, it receives and transmits RF energy. When you
communicate with your phone, the system handling your call
controls the power level at which your phone transmits.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to
assure the protection of all persons, regardless of age and
health.
The guidelines use a unit of measurement known as Specific
Absorption Rate, or SAR. The SAR limit for mobile devices
is 2 W/kg and the highest SAR value for this device when
tested at the head was 0.64 W/kg*, and when tested at the
body was 1.02 W/kg* with 5 mm distance. As mobile devices
offer a range of functions, they can be used in other
positions, such as on the body as described in this guide**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is due

Zte Blade L130 Specifications

General

Display Size	5.0 inches
Resolution	480 x 854 pixels
Processor	Quad-core 1.3 GHz
RAM	512 MB
Internal Storage	8 GB
Expandable Storage	microSD, up to 32 GB
Main Camera	5 MP
Selfie Camera	2 MP
Battery Capacity	2000 mAh
Operating System	Android 8.1 Oreo (Go edition)
SIM	Dual SIM (Micro-SIM, dual stand-by)
Display Type	TFT
GPU	Mali-400MP2
Main Camera Features	LED flash
Main Camera Video	720p@30fps
Loudspeaker	Yes
3.5mm jack	Yes
WLAN	Wi-Fi 802.11 b/g/n, hotspot
Bluetooth	4.2, A2DP
GPS	Yes, with A-GPS
Radio	FM radio
USB	microUSB 2.0
Sensors	Accelerometer
Chipset	Spreadtrum SC7731E
Battery Type	Li-Ion, removable