Zte Blade Vec 4G - Battery Charging and Phone Power Management; Completing Battery Charging; Powering Your Phone On and Off

7
2. Connect the charger to a standard AC wall
outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE: If the battery is extremely low, you may be
unable to power on the phone even when it is being
charged. In this case, try again after charging the
phone for at least 10 minutes. Contact customer
service if you still cannot power on the phone after
prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering
on.
• Press and hold the Power Key to turn on your
phone.
To turn it off, press and hold the Power Key to
open the options menu. Touch Power off > OK.
NOTE: If the screen freezes or takes too long to
respond, try pressing and holding the Power Key
for about 8 seconds to restart the phone.