22
Entering Text
Change Input Mode or Language
When you are in a field that allows characters to be
entered, the text input mode indicator is shown on the
right side of the status bar.
You can enter text using the following input modes: T12
abc, T12 Abc, T12 ABC, abc, Abc, ABC, and number input.
To change input mode, press and hold the Vibration
mode key and select one mode.
To switch the input language, press and hold the * key.
Use Predictive Text Mode (T12 abc / T12 Abc / T12
ABC)
The predictive text mode (T12 abc / T12 Abc / T12 ABC) is
based on a built-in dictionary and generates words from
the combination of letters pressed.
• Press each key once that corresponds to the letter
you want to enter. The letters are shown on the display
as they are entered. The list of candidate words
changes as each key is pressed. When the candidate
words are displayed, use the 4-way Navigation key to
highlight a candidate word and then press the Center
key.
• Press the 0 key to insert a space or press the * key to
select symbols.
• Press the Clear key to delete the letter to the left of
the cursor. Hold the Clear key to delete all entered
text to the left of the cursor.
Knowing the Basics
To Next Page
Loading...
