Zte k88 - Using Wi-Fi Direct

51
on in sleep mode.
 Scanning always available: Allow some services to scan
for networks even when Wi-Fi is off.
 Connect to AT&T Wi-Fi spot: Automatically connect to
AT&T Wi-Fi hotspots when they are available.
 Install certificates: Install certificates needed for
connecting to certain Wi-Fi networks.
 Wi-Fi Direct: Use the Wi-Fi Direct feature. See Using
Wi-Fi Direct
®
.
 WPS Push Button: Connect to a WPS network via the
push button method.
 WPS Pin Entry: Connect to a WPS network via the
device PIN method.
 MAC address: Check the MAC address.
 IP address: Check the device’s IP address.
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to share files and data directly
by connecting to each other without the need for wireless access
points (hotspots).
Connect to Another Device via Wi-Fi Direct
1. Touch the Home key > > Settings > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to the On position.
3. Touch > Advanced > Wi-Fi Direct. Your tablet will search