Zte Max Duo Z963VL - Adjusting Your Call Settings

42 43
Setting Sound and Vibration
Set the sound and vibration for incoming calls as well as dial pad sounds.
1. Press the Home Key > > > Settings > General settings.
2. In the Sounds and vibrate section, tap the option you want to congure.
• Tap Phone ringtone to select the ringtone for incoming call notication.
• Check Dialpad tones to play sounds when you tap the dial pad keys.
• Check Also vibrate for calls to enable vibration for incoming call notication.
NOTE: You can set the vibration pattern for incoming call notications. Press the
Home Key > > > Settings > Call settings > Vibrate pattern and select one.
Editing Quick Response to Rejected Callers
1. Press the Home Key > > > Settings > General settings > Quick responses.
2. Tap a text message to edit it.
3. Tap OK to save the message.
Setting Voicemail
1. Press the Home Key > > > Settings > Call settings.
2. Tap Voicemail to congure voicemail settings.
• Tap Service to select the voicemail service provider. My carrier is the default.
• Tap Setup to view the voicemail number.
• Tap Sound to select the notication sound for new voicemails.
• Check Vibrate to enable vibration for notication.
Setting TTY Mode
Your phone is a TTY compatible device. A TTY device can allow people who have hearing
or speech disabilities to communicate by telephone. Simply connect the TTY device to
the phone’s headset jack.
Select a TTY mode for your phone to work with a TTY device, or turn TTY o.
To respond to an incoming call while you’re on a call:
• Tap to answer the call. This puts the rst caller on hold and answers the
second call.
• Tap
to reject the second call.
• Tap
to reject the second call and select a preset text message or edit one to send
to the caller.
To switch between two calls:
Tap > .
Setting Up a Conference Call
With this feature, you can talk to two people at the same time.
1. Place the rst call.
2. Once you have established the connection, tap
> and dial the second number.
This puts the rst caller on hold.
3. When you’re connected to the second party, tap
.
If one of the people you called hangs up during your call, you and the remaining
caller stay connected. If you initiated the call and are the rst to hang up, all callers are
disconnected.
To end the conference call, tap
.
Adjusting Your Call Settings
Setting Contact Display Options
You can set the order of the contacts displayed in the CONTACTS tab of the Phone app.
1. Press the Home Key > > > Settings > General settings.
2. Tap Sort by or Name format to set the order of the contacts and the format of the
contact names.
Phone CallsPhone Calls