Zte MF58 - Page 46

ZTE MF58
45
A: It’s called “echo phenomenon”. It happens when the volume is set too high or your
handset is too close to the mobile camera.
Q: Why cannot the handset display the AD menu or control the mobile camera via
SMS commands?
A: It is because your number is not the AD number. Due to safety reasons, only the AD
number can set the parameters of the mobile camera using either the special menu or SMS
commands.
Q: Why cannot the video call be established when the mobile camera works
properly?
A: Make sure you are not roaming in a foreign network or using a CLIR function. No video
calls can be made if the mobile camera does not recognize the number. If you receive the
following SMS prompt: „The white list reaches its limit, you cannot be connected.” you may
press the Clear button at the rear panel of the camera to clear the 19 numbers stored in the
camera’s memory (except for the AD number), or delete some of the numbers in the white
list using the AD menu.
Q: What should I do in case the mobile camera unexpectedly ceases to operate
This Manual: http://www.manuallib.com/file/2593400