20
If you select Change PIN, you will see the following modification
parameters:
Type the old PIN code, and then type the new PIN code twice. Click Apply
to confirm your configuration.
NOTES:
Entering the wrong PIN code three consecutive times will lock the SIM card.
After you change the PIN code, you don’t need to input the PIN code again.
It is required after the device is restarted.
Resetting Your Device
There are two ways to reset your device.
Select Settings > Device Settings > Reset. Click Reset > Yes to set all
the settings to their factory default values. The device will restart
automatically.
Reset your device by pressing and holding the RESET Button.
1. Find the hole marked RESET on the side of the device.
2. Use the tray ejector tool to press and hold the RESET Button for three
seconds or longer.
To Next Page
Loading...
