MF93D

Let’s go

Getting started with your device.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, includ-

ing photocopying and microlm, without the prior written permission of

ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to

make modications on print errors or update specications without prior

notice.

Version No. : R1.0

Edition Time : 2013.04

NOTE:

Do not use the device in an enclosed environment or where heat dis-

sipation is poor. Prolonged work in such space may cause excessive

heat and raise ambient temperature, which may lead to automatic shut-

down of the device for your safety. In the case of such event, cool the

device in a well-ventilated place before turning on for normal use.

Getting to Know Your Device

Appearance

The following gure is only for your reference. The actual product may

be different.



External Antenna Connector



Micro USB Port



OLED Screen



Power Switch



(U)SIM Card Slot



RESET Button / microSD Card Slot



WPS Button

NOTES:

• microSD logo

is a trademark of SD Card Association.

• Please use the original external antenna if necessary.

Indicators

When the device is powered on, the following icons will appear on the

OLED screen, with the corresponding indicates listed in the table be-

low:

Icon Indication

Network signal strength.

2G/3G/4G

Network type. 2G, 3G, 4G icon will appear on the OLED

screen according to the network being connected.

Connect to the Internet automatically.

Connect to the Internet manually.

Roaming network indication.

New message received.

Wi-Fi Status and number of the connected users.

Battery power indication.

Connection Scenario

Your device supports two methods to go to Internet and supports multi-

clients for surng on the Internet at the same time. The following gure

is only for your reference.

• 4G Mode: Use your (U)SIM card to access the Internet.

• Internet Wi-Fi Mode: Your device will connect to other WLAN de-

vice (hotspot device, wireless router, etc.) via Wi-Fi to access the

Internet. The WLAN device has already connected to the Internet.

NOTE:

The subnet must be deferent between your device and other WLAN

device.

Installing Your Device

1. Insert the SIM card.

IMPORTANT: Your device does not support Micro/Nano or any other

nonstandard SIM cards. To avoid device damage, please do not use

them.

2. Insert the microSD card.

1) Open the microSD card cover.

NOTE:

Do not pull the cover rudely, as it is connected with the device.

2) Insert the microSD card into the microSD slot. The following picture

shows the correct inserting direction. You will hear a click when the

microSD card locks in place.

3) Close the microSD card cover.

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search for the

available wireless networks.

NOTE: Please set the client to obtain an IP address automatically refer-

ring to the chapter “Conguring Your PC”, and then the client will get an

IP address like “192.168.0.100”.

3. Select the SSID of your device, and then click Connect. The follow-

ing picture is only for your reference.

4. Input the password, and then click Connect.

NOTE:

• There may require the password for Wi-Fi connection, please check

the label on your device to get the default.

• Double press the WPS button, and then the SSID and Wi-Fi key

will display on the OLED screen.

5. Wait a moment, and then the client will connect to your device suc-

cessfully.

Via USB Cable

1. Connect to the device.

2. Power on your device.

3. The OS detects and recognizes new hardware and nishes the in-

stallation automatically.

NOTE: If the Windows operating system does not launch installation

automatically, you can run the installation program in path of My Com-

puter > ZTEMODEM.

4. Wait a moment, and then the client will connect to your device suc-

cessfully.

Accessing the Internet

4G Mode

After the client connected to your device successfully, you can access

the Internet in the Automatic or Manual mode. The default mode is

Automatic.

Mode Operations

Automatic

Your device will connect to the Internet automatically,

and your clients can surf on the Internet directly.

Manual

tings > Network Settings > Dial-up Settings > Man-

ual, and then click Home > Connect / Disconnect.

NOTE:

If you want to modify the detailed parameters of your device, please

http://m.home. The default password is admin.

Internet Wi-Fi Mode

1. Login the webGUI conguration page.

2. Select Settings > Internet Wi-Fi.

3. Set the Internet Wi-Fi Switch and Preferred Network, and then

click Apply.

NOTE:

You need to Enable the Internet Wi-Fi Switch and select Wi-Fi.

1 2 3 4 5 6 7 8 9

Zte MF93D - Page 54

Table of Contents

Other manuals for Zte MF93D

Related product manuals