17
(3) Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyls (PBB’s)
(6) Polybrominated diphenyl ethers (PBDE’s)
(Compliance is evidenced by written declaration from our suppliers, assuring that any potential trace contamination levels of the substances listed
above are below the maximum level set by EU 2002/95/EC, or are exempt due to their application.)
T-Mobile Affinity manufactured by ZTE CORPORATION, meets the require-ments of EU 2002/95/EC.
Disposal of your old phone
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive
2002/96/CE.
2. All electrical and electronic products should be disposed of separately from general household waste via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old phone will help prevent potential negative consequences for the environment and human health.
For this product’s Recycling Manual based on WEEE directive, please send an email to weee@zte.com.cn
, or visit the website below
to download the document: http://ensupport.zte.com.cn
.
EC DECLARATION OF CONFORMITY
It is hereby declared that following designated product:
Product Type: GSM（GPRS） Dual-Mode Digital Mobile Phone
Model No: ZTE-G N295/Sydney/Affinity
Complies with the essential protection requirements of the Radio and Telecommunication Terminal Equipment Directive (EC Directive 1999/5/EC)
This declaration applies to all specimens manufactured identical to the samples submitted for testing/evaluation.
Assessment of compliance of the product with the requirements relating to the Radio and Telecommunication Terminal Equipment Directive (EC
Directive 1999/5/EC) was performed by PHONEIX TESTLAB, Königswinkel 10 D-32825 Blomberg, Germany, based on the following standards:
Safety EN 60950-1:2006+A11:2009
EN 50332-1:2000
EMC EN 301 489-1 V1.8.1/-7 V1.3.1/-17 V2.1.1
ETSI EN301 489-34 V1.1.1(2010-10)
Radio EN 301 511 V9.0.2
EN 300 328 V1.7.1
Health EN50360:2001/EN 62209-1:2006/ EN62311: 2008/ EN 62209-2:2010
This declaration is the responsibility of the manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,
Nanshan District,Shenzhen, Guangdong, 518057, P.R.China
Authorised person signing for the company:
Xu feng Quality Director Of ZTE Corporation
Name in block letters & position in the company
Shenzhen, 11st May 2011
Place & date Legally valid signature _________________________________
Warranty
Article 1
The guarantee for this ZTE device (here on in referred to as Device) covers 24 (twenty four) months from the date the Device was purchased.
The manufacturer guarantees that the Device will properly function with proper usage and maintenance according to the instructions of the
manufacturer. The guarantee covers all Device faults which came to be because of eventual errors in the material and/or the manufacturing of the
Device. The guarantee can be used against presentation of the verified guarantee certificate and purchase invoice. The guarantee does not affect other
rights belonging to the buyer on other legal bases. The guarantee is valid in the territory of the UK.
Article 2
The guarantee does not cover: faults occurring because of unauthorised modifications to the software, mechanical damages, improper handling, and
higher forces (lightning, fire, unsuitable voltage and polarities, traffic accidents, humidity, water and alike), batteries and consumable material
including *:
a) Damages caused by using the Device outside of the instructions of the manufacturer and other documentation which is enclosed with the Device
as well as damages caused by using with other products of another manufacture which the manufacturer did not approve;
b) Damages caused by accidents, improper and wrong usage, floods, fire, earthquakes and superficial damages which include but are not limited to
scratches, dents, broken plastic and alike;
c) Damages caused by servicing (including upgrading and extension) by an unauthorised person as well as a fault of the Device or any part of it if
To Next Page
Loading...
