Zte Optus X Tap 3 - Setting Up Your Phone; Charging the Phone

11
Setting Up Your Phone
The nano-SIM card can be installed or removed while the
phone is turned on.
1. Locate the SIM tray on the left hand side panel. Insert a
pin into the small hole at the bottom of the SIM tray.
2. Place the nano-SIM card into the smaller section of the
tray, add a microSD card (optional) if you need more
storage (memory) in the device.
3. Replace the SIM tray
4. Your device supports Dual SIM configuration.
Charging the Phone
Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You