Zte SPRO - Projecting a File Saved in Your Spro; Projecting an HDMI Source

19
Projecting a File saved in Your spro
You can project a file stored in your spro.
1. Touch the Projection Key to turn on the projector.
2. Open the file you want to project.
3. Adjust the projection distance and place the spro on a flat surface.
NOTE:
For best results, project onto a flat screen at a 90° angle to the floor.
4. Adjust the projector view. You can rotate the focus wheel to adjust the
focus.
When you want to finish the projection, touch the Projector Key to turn off
the projector.
Projecting an HDMI Source
You can project an HDMI source when connecting your spro to a laptop or
TV box.
1. Connect your spro with the laptop or TV box via an HDMI cable (not
included).