Zte SPRO - Projecting a File Saved in Your USB Device

20
2. Touch the Projection Key to turn on the projector.
3. From the home screen, touch .
4. Operate your laptop or TV box to select the content you want to view.
Projecting a File Saved in Your USB Device
You can project a file stored on your USB device such as a USB flash
drive or portable hard drive.
1. Connect your spro with the USB device via the USB jack.
2. Touch the Projection Key to turn on the projector.
3. Touch the Home Key > > File Manager.
4. Touch USB DEVICE to open the file you want to project.
NOTE:
Before connecting your spro with the USB device, slide the status bar
down to open the notification panel and ensure that this option is
not highlighted.
NOTE:
Your spro only supports the portable hard drives with less than 2TB of