Page 17 of 38
SETTINGS > APN:
• Press Disconnect to disconnect from the Network
• Press Add New to create a new APN
• Add the Profile Name, eg Telstra WAP
• Enter the correct APN details eg telstra.wap
• Press Save to save your new APN
• Press the Profile drop down box
• Select the new APN profile name
• Click on ‘Set as default’ to set the new APN as your preferred setting
• Press the Help icon to get in context tips.
• Normally there is no need to change these settings unless you change service
provider or are instructed by your carrier.
• The hotspot is locked to Telstra. If you use a SIM card from another provider you
may not be able to connect to the network.
• Consult your new carrier to obtain alternate APN details for your device.
To Next Page
