Zte Telstra MF90 - QUICK REFERENCES AND CONNECTION EXAMPLE; Connection Steps and Login Details

Page 9 of 38
Connection example for Windows 7 computer:
1. On your task bar, next to the clock, click on the Network Interface icon
2. Click on the Wireless device called TPW4G_xxxxxx
3. Enter the default password exactly as shown on your Security Card (Or on the
sticker under the battery) observing the correct case for all letters
4. With Connect Automatically enabled your computer will remember the
password and connect to your Wi-Fi device when it is on and in range.
TIP
It is also possible to connect via USB connection. See later for details.
QUICK REFERENCES
Browser home page
http://m.home
Administrator login
password
Default SSID
TPW4G_xxxxxx
This is printed on your Security Card (in the box)
and is also on a sticker under the battery
Default Wi-Fi Key
10 characters which are case sensitive.
This is printed on your Security Card (in the box)
and is also on a sticker under the battery
Restore defaults
From the powered up state:
Open the back cover and locate the Reset button. This
is shown on the Insert SIM diagram above.
Depress gently using a pen or paperclip, and hold for
10 seconds
until the LED’s flash.
All passwords and settings will be restored to
defaults.
Use the default credentials printed under the
battery to log back onto your device.