EasyManua.ls Logo

Zte U50 - Page 138

Zte U50
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
137
5 Power key
Press and hold for about 3 seconds to
power on/o󰀨 your device.
6
Charging/USB
Type-C jack
Charge the device or connect to the
USB port of a computer.
7
External
antenna port
Connect the antennas if necessary.
Support:
Tx/PRX NR 38/77/78 LTE B42/43
8
External
antenna port
Connect the antennas if necessary.
Support:
DRX NR 38/77/78 LTE B42/43
* After the device has not been operated for about 15
seconds, the indicator lights turn o󰀨 and it’s in power saving
mode. You can press any key to turn on the indicator lights.
*Open the back cover and you can nd the RESET hole.
Press and hold for about 2 seconds to restore your device
to the factory settings. Please use the appropriate tool to
operate the reset hole, which is 9mm deep.
*For better signal, it is recommended to use two external
antenna ports simultaneously.

Related product manuals