9
Advanced Configuration
1. Make sure your computer is connected to the ZTE Unite.
2. Launch the Internet Browser and enter
http://uscc.hotspot
or
http://192.168.1.1
in the address bar.
NOTE:
It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari
(4.0 or later) or Chrome (10.0 or later).
3. The login page appears as follow:
Input the default password which is printed beside the battery compartment of your ZTE Unite, and then
click Login to access the Web User Interface.
NOTE: Do not put anything on the top of your ZTE Unite. Do not lay devices to overlap each other when
using.The ZTE Unite takes 1~2 minutes to initialize, and attach to the network.
Basic Setup
After logging in, select Basic Setup > Quick Setup to configure the Wi-Fi settings, including Wi-Fi
Network Name, Wi-Fi Securiy Policy and Sleep Time.
To Next Page
Loading...
Need help?
General
