15
Default Policy: Set how to handle the packet if any of the rules matches.
Source IP Address: Set the source IP address that will be filtered.
Source Submask: Set the source submask that will be filtered.
Protocol: Set which protocol will be used for filtering.
Source Port Range: Set the source port numbers that will be filtered.
Dest Port Range: Set the destination port numbers that will be filtered.
How to add a new rule:
1. Select Enable and click Apply in the Basic Settings area.
2. Input the detail information in the IP/Port Filter Settings area.
3. Click Add in the IP/Port Filtering Settings area.
In the Current IP/Port filtering rules in system area, click Delete to delete the rules that you selected.
Select Firewall > Port Forwarding to access:
If you select Enable, the Virtual Server Settings will appear:
IP Address: Set IP address for the virtual server.
Port: Set port number for the virtual server.
Protocol: Set the protocol for the virtual server.
How to add a virtual server:
1. Select Enable and input the detailed information in the Virtual Server Settings area.
2. Click Apply to save your settings.
In the Current Virtual Servers in system area, click Delete to delete the virtual servers that you selected.
Select Firewall > VPN to enable/disable the VPN Connection.
To Next Page
Loading...
Need help?
General
