Follow these Steps:
1. Use your normal Wi-Fi application on your computer or other Wi-Fi enabled
device to establish a connection to your ZTE Unite.
2. Look for the network (SSID) named “USCC-EuFi891-XXXX”. XXXX varies
from device to device.
3. Click Connect and enter the default password printed beside the battery com-
partment of your ZTE Unite.
NOTE: Your password will also be displayed on the ZTE Unite screen each time
the ZTE Unite is powered on.
Device Customization And Conguration
To congure the ZTE Unite using the Web User Interface, go to http://192.168.1.1.
11
To Next Page
Loading...
