What to do if there is no dial tone on my Zte Touch terminal?
If there is no dial tone on your Zte Touch terminal, please wait for 1~2 minutes after the WF723CA is turned on. If the signal reception is poor, move to an area where signal reception is better.
What to do if after dialing there is no tone on Zte WF723CA Touch terminals?
If there is no tone after dialing on your Zte Touch terminal, wait 4~8 seconds for the call to connect.
What to do if there is a rapid engaged tone when the phone is removed from the receiver of my Zte Touch terminal?
If you hear a rapid engaged tone when you pick up the phone connected to your Zte Touch terminal, place the phone back on the receiver and try again.
General| Brand | Zte |
|---|---|
| Model | WF723CA |
| Category | Touch terminals |
| Language | English |
Overview of the WF723CA device components and indicators.
Details the device's ports and power switch.
Step-by-step guide for installing the nano-SIM card.
Instructions for inserting the device's battery.
How to connect the WF723CA to a power source for charging.
Explains the meaning of different indicator lights on the device.
Guidance on placing the WF723CA for optimal signal reception.
Procedure to turn the WF723CA device on and off.
Steps to connect the WF723CA to a home phone.
Instructions on how to make and answer calls using the WF723CA.
How to control the call volume on the WF723CA.
Procedures for checking and setting up voicemail.
Guide to initiating three-way conference calls.
How to manage incoming calls while on an active call.
Explains how to set up call forwarding features.
Information on using the device with TTY devices for accessibility.
Details on SIM card PIN and PUK lock status and actions.
Technical details of the WF723CA device, including dimensions and processor.
Information on the device's battery type, voltage, and capacity.
General safety guidelines for using the WF723CA.
Instructions on how to clean and care for the device.
Details regarding the product's warranty terms and conditions.
Legal disclaimer on the manufacturer's liability.
Information on the device's compliance with FCC regulations.
Details on the device's compliance with RF exposure limits.
Specific requirements related to CTIA compliance for the device.
Information regarding Industry Canada (IC) compliance.
To Next Page
