Zte Z288L - White List and WPS Configuration

ZTE Z288L User Manual
14 Confidential and Proprietary Information of ZTE CORPORATION
info will be intercepted or network will be used by unauthorized individuals.
WPA2(AES)-PSK
It is the securer version of WPA with implementation of the 802.11i standard.
WPA-PSK/WPA2-PSK
Apply both the WPA-PSK and WPA2-PSK scheme.
 Encryption Type: Select an encryption type from the drop-down list.
 Max Connections: Choose the maximum number of the stations which connect the AP simultaneously.
Click Apply to confirm your configuration.
White List
A white list is a list of Wi-Fi devices that are approved to connect to this Wi-Fi hotspot. Select Settings >
Wi-Fi Settings > White List, the White List configuration is shown in the following figure:
If you select Enable, the white list settings will appear as shown below:
 MAC Address: Set the MAC address that are approved to connect to this Wi-Fi hotspot
Click Apply to confirm your configuration.
WPS
Select Settings > Wi-Fi Settings > WPS, the WPS configuration is shown in the following figure: