Zte ZXDSL 831A II User Manual

ZXDSL 831AⅡ
User’s Manual
Document version: 201004012-R3.1
Copyright 2006 ZTE Corporation
All rights reserved.
No part of this documentation may be excerpted, reproduced,
translated, annotated or duplicated, in any form or by any
means without the prior written permission of ZTE
Corporation.
ZTE CORPORATION reserves the right to modify this manual
for product upgrade or other causes without notifying users in
advance.

Zte ZXDSL 831A II Specifications

General

Modem Type	ADSL
Device Type	Modem
Ports	1 x Ethernet, 1 x USB
Wireless	No
Operating System Compatibility	Windows, Mac OS, Linux
ADSL Standard	ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite)
Protocols	DHCP, NAT
Security	Firewall, NAT
Power Supply	12V DC
Data Rate	Upstream: Up to 1 Mbps, Downstream: Up to 8 Mbps

Summary

Limited Warranty

Limitation of Liability

Confidentiality

Chapter 1 Safety Guidance

1.1 Safety Check

Items to verify before installing ADSL equipment to ensure proper operation.

1.2 Safety Cautions

Important precautions and warnings for safe usage of the ZXDSL 831A II.

Chapter 2 Overview

2.1 Features

Key characteristics and capabilities of the ZXDSL 831A II ADSL modem.

2.2 Product Specifications

Technical details including environmental requirements and power specifications.

2.3 Package Check

List of all items included in the ZXDSL 831A II package for user verification.

2.4 System Requirement

Prerequisites for ADSL service, computer configuration, and operating systems.

Chapter 3 Installation Preparation

3.1 Hardware Description

Description of the front panel LEDs and rear panel interfaces of the device.

3.2 Hardware Connection

Diagrams and procedures for connecting the ZXDSL 831A II to network and phone lines.

Chapter 4 Install USB Driver

4.1 USB Driver Installation

Step-by-step guide for installing the USB driver on Windows XP for PC connection.

4.2 USB Driver Uninstall

Instructions for removing the installed USB driver from the Windows system.

Appendix B Standard Compliance