Confidential and Proprietary Information of ZTE CORPORATION 3
3. Insert the battery as shown with the contacts located against the metal springs, and press the battery
down into the case.
4. Close the back cover.
Inserting the microSDHC Card
NOTE:
microSDHC logo is a trademark of SD-3C, LLC.
1. Pull the microSDHC card cover out of the card slot.
NOTE:
Do not pull the cover rudely, as it is connected with the device.
2. Insert the microSDHC card into the microSDHC card slot. The following picture shows the correct
inserting direction. You will hear a click when the microSDHC card locks in place.
To Next Page
Loading...
