Zte Z3001S - Getting Started; Installing the nano-UIM Card

11
Getting Started
Installing the nano-UIM Card (Included)
The nano-UIM card can be installed or removed while the
phone is turned on.
Power off your phone before removing or replacing the battery.
NOTE:
Your phone will come with the nano-UIM card already
installed.
WARNING!
To avoid damage to the phone, do not use any
other kind of UIM cards, or any non-standard nano-UIM card
cut from a UIM card. You can get a standard nano-UIM card
from your service provider.
1. Insert your ngernail into the bottom left corner of the back
cover and lift it up gently.