Zte Z3001S - Page 46

46
To enable and use gesture typing:
1. On the Gboard, press and hold
> > Gboard
Keyboard settings > Glide typing
.
2. Turn on the switch next to
Enable glide typing
if this
feature is turned off.
3. Move your nger from letter to letter on the keyboard to
trace a word without lifting the nger until you reach the end
of the word.
NOTES:
• Tap when you want to. If you want to enter a single letter,
go ahead and tap.
• Lift your nger at the end of the word. A space is added
automatically when you begin to input the next word.
End of
the word
Start of
the word