Zte Z3001S - Page 56

56
Method two: PIN
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi
.
2. Slide the
Wi-Fi
switch to the
On
position.
3. Tap
> Advanced > WPS Pin Entry
.
4. The WPS PIN displays on the screen. Enter the PIN into
the access point’s setup page.
After entering the PIN, your phone automatically nds the
access point and congures the connection.
NOTE:
For detailed information about the WPS feature of the
access point, please refer to its documentation.
Adjusting Advanced Wi-Fi Settings
1. Swipe up from the bottom of the home screen and tap
Settings > Wi-Fi
.
2. Tap to adjust the following settings.
•
Network notication:
Get notications in the Status
Bar when Wi-Fi is on and an open network is available.
•
Keep Wi-Fi on during sleep:
Choose whether or not to
keep Wi-Fi on in sleep mode.
•
MAC address:
Check the MAC address.
•
IP address:
Check the phone’s IP address.