Zte Z557 - Page 50

50
range.
To connect to a secured network, you first need to get the
security details from the network's administrator.
1. Swipe up on the home screen and touch Settings >
Network & Internet > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. At the bottom of the available Wi-Fi networks, touch Add
network.
4. Enter the network SSID (name). If necessary, enter security
or other network configuration details.
5. Touch SAVE.
Forget a Wi-Fi Network
You can make your phone forget the details of a Wi-Fi network
that you added - for example, if you don’t want the phone to
connect to it automatically or if it is a network that you no longer
use.
1. Swipe up on the home screen and touch Settings >
Network & Internet > Wi-Fi.
2. Touch Saved networks.
3. Touch the Wi-Fi network name and then touch FORGET.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which support WPS.
You can use one of the following methods to connect your