18
removed while the phone is turned on. You need to unmount the
microSD card before removing it.
WARNING!
To avoid damage to the phone, do not use any non-standard
nano-SIM card cut from a card. You can get a standard nano-SIM
card from your service provider.
1. Insert the tip of the tray eject tool into the hole on the card
tray.
2. Pull out the card tray and place the nano-SIM card (right)
/microSD card (left) facing down on the tray. Gently slide the
card tray in until it clicks into place.
To Next Page
Loading...
