Zte ZXA10 C300 - P2 P Interface Card Running Status Check; TDM Interface Card Running Status Check

ZXA10C300MaintenanceManual
IndicatorStatusDescription
GreenLEDisOFF.Theopticalinterfaceisnotconnected.
GreenLEDisON.Theopticalinterfaceisconnected(LINK).
ACTi(i=1–8)/1
–8/X1–X2
GreenLEDashes.Theopticalinterfaceissendingandreceivingthe
data(ACTIVE).
2.2.7P2PInterfaceCardRunningStatusCheck
TheZXA10C300usestheFTGKP2Pinterfacecard.
Table2-14describestheindicatorsoftheP2PEthernetinterfacecard.
Table2-14IndicatorDescriptionofP2PInterfaceCard
IndicatorStatusDescription
OFFThecardpowersOFForCPUisnotstarted.
GreenLEDisON.Thecardself-checkingcompletesbutfailsto
receivedatafromthecontrolandswitchingcard
orNM.
GreenLEDashesquickly.Thecardisdownloadingdatafromtheswitching
andcontrolcardorNM.
GreenLEDashesslowly
everytwoseconds.
Thecardisworkingproperly.
RedLEDisON.Cardhardwarefailure
RedLEDashesslowly
everytwoseconds.
Thecardshouldnotbeinsertedinthisslot.
RUN
YellowLEDashesslowly
everytwoseconds.
Thesoftwareversionofthecarddoesnotmatch
thatofthecontrolandswitchingcard.Auto-update
isnotconguredonthecard.
GreenLEDisOFF.Theopticalinterfaceisnotconnectedorthelink
isnotestablished
GreenLEDisON.Theopticalinterfaceisconnected(LINK).
LEDi(i=1-48)
GreenLEDashes.Theopticalinterfaceissendingandreceivingthe
data(ACTIVE).
2.2.8TDMInterfaceCardRunningStatusCheck
TheZXA10C300usesthefollowingTDMinterfacecards:
lSTM-Ncircuitemulationinterfacecard:CTLA
lE1circuitemulationinterfacecard:CTUB
2-12
SJ-20130520164529-008|2013-06-30(R1.0)ZTEProprietaryandCondential