Zte ZXA10 C300 - Ethernet Uplink Card Running Status Check

ZXA10C300MaintenanceManual
IndicatorStatusDescription
OFFlNoONUisconguredontheXG-PON1
interface.
lTheXG-PON1interfacehasnoopticalmodule
installed.
lTheXG-PON1interfaceisshutdown.
lTheXG-PON1interfaceisTypeBprotection
port.
GreenLEDashes.TheXG-PON1interfaceandconnectedONUs
workproperly.
ACTi(i=1-8)
RedLEDisON.TheXG-PON1interfacehasLOSalarms.
2.2.5EthernetUplinkCardRunningStatusCheck
TheZXA10C300usesthefollowingEthernetuplinkcards:
l10GEEthernetuplinkcard:XUTQandXUVQ
l10GE/40GEEthernetuplinkcard:HUKQ
l10GE/GEEthernetuplinkcard:HUTQandHUVQ
lGEEthernetuplinkcard:GUFQ,GUSQ,GUTQ,andHUGQ
10GEEthernetUplinkCard
Table2-9describestheindicatorsofthe10GEEthernetuplinkcards.
Table2-9IndicatorDescriptionof10GEEthernetUplinkCard
IndicatorStatusDescription
OFFlThecardisnotpoweredON.
lThecarddoesnotmatch.
lCPUisnotstarted.
GreenLEDisON.Thecardself-checkingcompletesbutfailsto
receivedatafromtheswitchingandcontrolcard
orNM.
GreenLEDashes
irregularly.
Thecardisdownloadingdatafromtheswitching
andcontrolcardorthenetworkmanagement
server.
GreenLEDashesslowly
everytwoseconds.
Thecardrunsproperly.
RedLEDisON.Cardhardwarefailure
RedLEDashesslowly
everytwoseconds.
Thecardisinstalledinthewrongslot.
RUN
2-8
SJ-20130520164529-008|2013-06-30(R1.0)ZTEProprietaryandCondential