Chapter 5: Web Configuration
35
To save the new settings to flash memory and take effect next time your reboot the ADSL Router, after clicking
Apply, you should perform the task of Save Configuration.
Remote Management
This function allows remote client to access this router from WAN side. You can set the lease time and click Enable
to enable this setting. Please click the first radio button and type in the duration time on the box or click on the
second radio button to choose unlimited time.
To disable this function, just click Disable.
Web Port
The default web server port is 80. You can change the web server port to another one and then click Apply to enable
this setting.
Note: Clicking Apply will enable the new setting right away. When you continue to access
other pages, you will need to re-login at new web port.
To Next Page
Loading...
