Chapter 5: Web Configuration
57
ATM PVC Name: Select the ATM PVC name from the drop down list. Currently only ppp-0 interface is
provided.
Protocol: Select a protocol type used by the service that will be forwarded.
TCP/IP Port: The Router supports port mapping function that translates a standard port number to a
non-standard number. Incoming data packets sent to a specific IP port can be mapped to the
port you specify. The most often used port numbers include:
21 (FTP), 80 (HTTP), 23 (Telnet) and 25(SMTP)
IP Address: Specify the internal IP address to which the packets are forwarded.
Then follow the steps below:
1. Select the ATM PVC interface.
2. Select the protocol type from the drop-down list.
3. Select a service in TCP /IP Port field and enter the port number you want to use.
4. Enter the IP address of the internal server in the IP Address filed and enter the TCP/IP port information in the
TCP/IP Port field.
5. Click Apply to commit the setting.
Setting Up DMZ Host
Direct Mapping Zone (DMZ) uses a technology that makes Router forwarding all incoming packet to internal
specific server. To setup DMZ host for your router, please click Setup DMZ Host button.
Then follow the steps below:
To Next Page
Loading...
