ADSL Router User Manual
50
does not need to type in the DNS server address. Simply click Enabled item on DNS Relay settings and leave the
address entry lines blank. Finally, click Apply. DNS Relay will be invoked.
If you have been setting before, the page will show all the DNS Relay status. To disable DNS relay, just select the
Disabled option then click Configure. To modify setting select enable and click Configure again.
DNS Server
The DNS server address will be passed to the DHCP clients along with the IP address and the DHCP clients use the
DNS to map a domain name to its corresponding IP address and vice versa.
To Next Page
Loading...
