Zte ZXHN F2886Q - Technical Features


Ethernet interface: one 100 Mbps/1 Gbps/2.5 Gbps/5 Gbps/10 Gbps interface
and four auto-sensing 100 Mbps/1000 Mbps interfaces in compliance with the
IEEE 802.3 standard.

WLAN interface: supports 802.11b/g/n/ax@2.4G Hz & 802.11a/n/ac/ax@5G Hz &
802.11ax@6G Hz Tri-band concurrent Wi-Fi with up to 10.8 Gbps PHY rate and
excellent coverage.

Phone interface: Two POTS ports with RJ-11 connector.
Technical Features

Broadband service access: Connected to Internet through the XGS-PON access
method.

Ethernet service access: Provides Ethernet interfaces, connected to the Ether-
net devices, such as the user PC. Provides the Internet access and IPTV services.

Phone service access: Supports SIP protocol.

WLAN: Users can connect to the ZXHN F2886Q through WLAN.

Security: Provides multi-level authentication based on the device, user and ser-
vice, and provides the data channel encryption for safety.

QoS: Provides QoS services meeting the requirements of various services for
the local devices and network.

Network management: Provides multi-mode network management.
4 Hardware Description
Indicators
Figure 4-1 shows the indicators of the unit.