Need help?Do you have a question about the Zte ZXA10 C320 and is the answer not in the manual?
General| Product Type | Optical Line Terminal (OLT) |
|---|---|
| Chassis Height | 2U |
| Service Slots | 2 |
| Uplink Slots | 2 |
| Redundancy | Supported |
| Uplink Ports | 4 x 10GE |
Safety precautions for protection ground and batteries.
Explanation of safety signs used in the manual.
Classifies maintenance into equipment and NM sides.
General safety and procedural precautions for routine maintenance.
Details maintenance tasks for equipment.
Maintenance tasks related to the NetNumen system.
Steps to configure the FTP server for data backup.
Procedures for saving network element data.
Detailed steps for backing up NE data.
Procedure to restore NE data from backups.
Steps for switching between active and standby cards.
Definition of system capacity expansion.
Describes the process and flowchart for system expansion.
Steps to take if expansion fails.
Definition of device replacement/cutover.
Describes the process and flowchart for system cutover.
Steps to take if cutover fails.
Introduction to version upgrade flow.
Lists version files for ZXA10 C320 cards.
Important safety and procedural notes for upgrading.
Lists required tools for software upgrading.
Steps to prepare for software upgrading.
Describes the step-by-step process for upgrading software.
Procedures to verify successful software upgrade.
Guidance on handling software upgrade failures.
Safety and handling precautions for replacing cards.
Procedure for replacing the main control card.
Procedure for replacing other service cards.
To Next Page
